CADO Fabrications Since 1965

ljljkl

We raised the bar on quality control through our exclusive concept of
Quality Cado, a continuously charged commitment to excellence.
Quality Cado is more than just a review of the production procss.
It begins with our first conversation and flows non stop until every detail
of customer satisfaction and product development has been closed.

Never a shortcut, never an oversight

That's the Cado Way

ASSEMBLY AND TEST AREA, Plant 2

2 - POWER SOURCE
   Elgar AC Power Source
          OUTPUT SIGNAL AMPLITUDE: 2V RMS
          HARMONIC DISTORTION : LESS THAN 0.025% OF OUTPUT 45 HRTZ TO 5 KHZ
          FREQUENCY RANGES: X1 45 HZ TO 99.99 HZ
                                       X10 45 HZ TO 999.99 HZ
    IDEAL FOR GENERAL PURPOSE TEST APPLICATIONS, AS WELL AS ATE SYSTEMS AND AVIONICS TESTING.
    PROGRAMMABLE VIE THE IEEE 488 GENERAL PURPOSE INTERFACE BUS (GPIB)
    AC POWER AT PRECISE FREQUENCIES FOR TESTING, MOTOR OPERATION, AND FREQUENCY CONVERSION
    OUTPUT VOLTAGE RANGES FROM: 0 TO 65 VAC
                                                  0 TO 130 VAC
                                                  0 TO 260 VAC
    THE POWER SOURCE CAN BE CONFIGURED FOR A 115, 208, OR 230 VAC IMPUTE47 - 63 HZ, SINGLE PHASE
    STACO TYPE L501 POWER SOURCE

3 - DUAL DISPLAY MULTI METER
   FLUKE TRUE RMS 5-DIGIT DMM
          5 DIGIT 100,000 COUNT DMM
          MEASUREMENT RATES OF 2.5, 5, OR 20 READINGS PER SECOND
          READOUTS SHOW BOTH HI/LO/PASS EVALUATION AND MEASURED VALUE
          21 REFERENCE IMPEDANCE FROM 2 OHMS TO 8000 OHMS. FOR 2,4,8 AND 16 OHM IMPEDANCE
          ADDITIONAL FEATURES INCLUDE TOUCH-HOLD FUNCTION, RELATIVE REFERENCE, MIN/MAX MODE,AUDIBLE CONTINUITY AND DIODE TESTS.

2 - OSCILLOSCOPE
   TEKTRONIKS TD 200 SERIES
          1 GS/S SAMPLE RATE
          WAVEFORM AND SET UP MEMORIES
          SAMPLING AT 10 TO 16 TIMES THEIR BANDWIDTHS ON BOTH CHANNELS
          DIGITAL STORAGE TECHNOLOGY
          FIVE AUTOMATIC MEASUREMENTS PROVIDE QUICK EVALUATION OF ADVANCED SCOPE OPERATIONS 100 MHZ BAND WITH

1 - ASSOCIATED RESEARCH HYPOT & GROUND TEST SET
    MANUFACTURING AND PRODUCTION LINE TESTING OF COMMERCIAL PRODUCTS TO MEET UL, CSA, VDE, BSI, AND IEC    REQUIREMENTS
    WHERE DIELECTRIC WITHSTAND AND GROUND CONTINUITY TESTS ARE SPECIFIED.
    ANALOG KILOVOLTMETER WITH 50 VOLT READING RESOLUTION
    LINE SAFETY MONITOR
    FAILURE DETECTOR
    ONE SECOND TIMER
    CALIBRATION RESISTOR

1 - PSC GROUND IMPEDANCE TESTER
   VOLTAGE MEASUREMENT ACCURACY: 1% (CONTACT IMPEDANCE TYPICALLY 1MV)
    RANGE: 0 TO 19.9V
    IMPEDANCE CALCULATED: 0 TO 199 M OHMSC     CURRENT MEASUREMENT ACCURACY: 3% OF READING
    RANGE : 0 TO 50 AMPS
    CALCULATED METHOD: VOLTAGE DROP IS MEASURED AND IMPEDANCE CALCULATED AS PER IEC950,
    CLAUSE 2.5.11 AND IEC 601-1 CLAUSE 18F
    OPERATING CYCLE : CONTINUOUS TO TEST CURRENTS OF 25A DERATED TO 50% DUTY CYCLE AT 50 25 TO 40 AMPS:
    2 MIN 40 TO 50 AMPS: 1 MIN
    MAXIMUM CIRCUIT VOLTAGE: 7.9 VOLTS
    IMPUTE POWER REQUIREMENTS: 105 TO 125 VOLTS RMS 50\60 HZ
    MAXIMUM POWER: 500 WATTS 4.0 A@ 120v

MICRO ELECTRONIC SOLDERING
   3 - WELLER WTCP SERIES SOLDERING STATIONS
        STATIC DISSAPATIVE HOUSING
          MAGNASTAT TEMPERATURE CONTROLS
          LOW VOLTAGE CLOSED LOOP DESIGN PROTECTS HEAT
          SENSITIVE MATERIALS
          ESD SAFE WORK STATIONS FOR MAXIMUM PROTECTION
    1 - PACE ST25 WIRE SOLDERER

MISCELLANEOUS ASSEMBLY EQUIPMENT

  1 - CHERRY MODEL #G743 AIR RIVET GUN
   1 - AVDEL MODEL #0761 AIR RIVET GUN
   1 - AVDEL MODEL #07531 AIR RIVET GUN